China Best Sales Custom High Precision Stainless Steel Aluminum POM Nylon Plastic Gear wholesaler

Product Description

Custom High Precision Stainless Steel Aluminum POM Nylon Plastic Gear

Gear transmission relies on the thrust between gear teeth to transmit motion and power, also known as meshing transmission. With this gradual meshing, helical gears operate much more smoothly and quietly than spur gears. Therefore, almost all automobile transmissions use helical gears.Since the teeth on the helical gear present a certain angle, the gears will be under a certain amount of  stress when they mesh. Equipment using helical gears is equipped with bearings to withstand this pressure.

Product Description

Product name Worm Gear and Worm Wheel & Plastic Gear
Materials Available Stainless Steel, Carbon Steel, Brass,  Bronze, Iron, Aluminum Alloy,Copper,Plastic etc
Heat Treatment Quenching & Tempering, Carburizing & Quenching, High-frequency Hardening, Carbonitriding……
Surface Treatment Carburizing and Quenching,Tempering ,Tooth suface high quenching Hardening,Tempering
BORE Finished bore, Pilot Bore, Special request
Processing Method Molding, Shaving, Hobbing, Drilling, Tapping, Reaming, Manual Chamfering, Grinding etc
Pressure Angle 20 Degree
Hardness 55- 60HRC
Size Customer Drawings & ISO standard
Package Wooden Case/Container and pallet, or made-to-order
Certificate ISO9001:2008
Applications Electric machinery, metallurgical machinery, environmental protection machinery, electronic and electrical appliances, road construction machinery, chemical machinery, food machinery, light industrial machinery, mining machinery, transportation machinery, construction machinery, building materials machinery, cement machinery, rubber machinery, water conservancy machinery and petroleum machinery
Machining Process Material preparation, normalizing, rough turning, quenching and tempering, semi fine turning outer circle, rough turning spiral surface, fine turning (fine grinding) inner hole end face, keyway, semi fine turning spiral surface, pliers (rest incomplete teeth), semi fine grinding outer circle, semi fine grinding spiral surface, grinding center hole, fine grinding outer circle, fine grinding spiral surface, finished product inspection
Advantages 1. Produce strictly in accordance with ANSI or DIN standard dimension
2. Material: SCM 415 steel 
3. Bore: Finished bore
4. Precision grade: DIN 5 to DIN 7
5. Surface treatment: Carburizing and Quenching
6. Module: From 1 to 4
7. Tooth: From Z15 to Z70

Company Profile

Packaging & Shipping

FAQ

1.Which countries is the main markets?
A: North America, South America, Eastern Europe, Weat Europe, North Europe, South Europe, Asia

2. How to order?
A:1) you send us drawing or sample; 
2) we carry through project assessment;
3) we give you our design for your comfirmation; 
4) we make the sample and send it to you after you confirmed our design; 
5) we start producing; 
6) when the goods is done, you pay us the balance after you confirmed pictures or tracking numbers; 
7) trade is done, thank you!
 

Application: Machinery, Agricultural Machinery, Automation Equipment
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: S45c
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

aluminum gear

Can aluminum gears withstand high torque and load conditions?

Aluminum gears have certain limitations when it comes to high torque and load conditions. Here’s a detailed explanation:

1. Strength: Aluminum is generally not as strong as materials like steel or cast iron. While aluminum alloys used for gears can offer good strength, they may not be as robust as traditional materials in terms of absolute strength. Under extremely high torque or heavy load conditions, there is a risk of deformation or failure of aluminum gears.

2. Design Considerations: To ensure that aluminum gears can withstand high torque and load conditions, proper design considerations are crucial. Factors such as gear geometry, tooth profile, tooth thickness, and material selection need to be carefully evaluated and optimized. Reinforcements, such as ribbing or thicker sections, can be incorporated into the gear design to enhance strength and load-bearing capacity.

3. Heat Dissipation: Aluminum has good thermal conductivity, which helps dissipate heat generated during high torque or heavy load operations. Heat can affect the performance and integrity of gears, leading to increased wear or potential failure. Proper lubrication and cooling mechanisms should be implemented to manage heat buildup and ensure optimal gear performance.

4. Surface Treatments: Surface treatments like hard anodizing or coatings can be applied to aluminum gears to improve their hardness, wear resistance, and surface durability. These treatments help mitigate the effects of high torque and load conditions, reducing the risk of surface damage or wear.

5. Application Considerations: The suitability of aluminum gears for high torque and load conditions depends on the specific application requirements. In some cases, aluminum gears may be well-suited for moderate torque and load applications, such as in certain automotive or machinery applications. However, in heavy-duty or extreme conditions, alternative materials like steel or cast iron may be more appropriate.

It’s important to note that engineering judgment, proper design practices, and thorough evaluation of the specific operating conditions are essential in determining whether aluminum gears can withstand high torque and load conditions. In critical applications where high torque or heavy loads are expected, gear manufacturers may choose materials with higher strength and load-bearing capabilities.

In summary, while aluminum gears can be used in certain high torque and load conditions, their suitability depends on factors such as gear design, material selection, heat dissipation, surface treatments, and application requirements. Careful consideration and engineering expertise are necessary to ensure safe and reliable operation of aluminum gears under these conditions.

aluminum gear

What are the safety considerations when using aluminum gears?

When using aluminum gears, several safety considerations should be taken into account. Here’s a detailed explanation:

1. Load Capacity: It is essential to ensure that the selected aluminum gear is capable of handling the intended load and torque requirements. Exceeding the gear’s load capacity can lead to premature failure, gear tooth breakage, or gear system malfunction, compromising safety. Proper gear selection and design based on load calculations are crucial to maintain safe operation.

2. Material Compatibility: Aluminum gears should be compatible with other components within the system. Consideration must be given to the materials used for mating gears, shafts, bearings, and housing to avoid galvanic corrosion or excessive wear. Compatibility between materials ensures the integrity and reliability of the gear system.

3. Mechanical Interference: During gear operation, it is important to ensure that there is no mechanical interference between aluminum gears and other system components. Adequate clearance and proper alignment should be maintained to prevent contact or binding, which can lead to gear damage, increased wear, or system failure.

4. Lubrication and Maintenance: Proper lubrication is critical for the safe and efficient operation of aluminum gears. Inadequate lubrication can result in increased friction, heat generation, wear, and potential gear failure. Regular maintenance, including lubricant inspection and replacement, should be performed to ensure optimal gear performance and longevity.

5. Noise and Vibration: Aluminum gears can generate noise and vibration during operation. Excessive noise and vibration can not only affect the performance and efficiency of the gear system but also potentially cause discomfort or harm to operators. Proper noise and vibration mitigation measures, such as using noise-dampening materials or implementing vibration isolation techniques, should be considered to maintain a safe working environment.

6. Temperature Considerations: Aluminum gears have limitations regarding operating temperatures. High temperatures can cause thermal expansion, leading to dimensional changes and potential gear misalignment. On the other hand, extremely low temperatures can affect the material’s toughness and increase the risk of gear failure. It is important to operate aluminum gears within their recommended temperature range to ensure safe and reliable performance.

7. System Integration: When integrating aluminum gears into a larger system, proper engineering practices and safety standards should be followed. This includes considering factors such as gear positioning, guarding, and emergency shutdown mechanisms to prevent accidents or injuries caused by inadvertent contact with rotating gears.

8. Operator Training: Operators and maintenance personnel should receive adequate training and instructions on the safe operation, handling, and maintenance of aluminum gears. This includes understanding gear system limitations, safety procedures, and proper use of personal protective equipment (PPE) when working with gears or gear systems.

By addressing these safety considerations, manufacturers and users can ensure the safe and reliable operation of aluminum gears, minimizing the risk of accidents, equipment damage, and personal injury.

aluminum gear

What are aluminum gears and how are they used?

Aluminum gears are gears made from aluminum, a lightweight and versatile metal. Here’s a detailed explanation of aluminum gears and their uses:

1. Material Properties: Aluminum gears are typically made from aluminum alloys, which offer several advantages. Aluminum is lightweight, with a density significantly lower than that of steel or other metals. It also has good corrosion resistance, excellent thermal conductivity, and is easy to machine, making it suitable for various applications.

2. Applications: Aluminum gears find application in a range of industries and systems, including:

  • Automotive: Aluminum gears are used in automotive transmissions, where their lightweight nature helps reduce the overall weight of the vehicle, contributing to improved fuel efficiency.
  • Aerospace: In aerospace applications, aluminum gears are utilized in aircraft components, such as landing gear systems and actuation mechanisms, where weight reduction is critical for fuel efficiency and performance.
  • Robotics: Aluminum gears are commonly employed in robotics for their lightweight characteristics, allowing for efficient movement and reduced power requirements.
  • Electrical and Electronics: Aluminum gears are utilized in various electrical and electronic devices, such as printers, scanners, and small appliances, where low weight and noise reduction are important.
  • Sports Equipment: Aluminum gears are found in sporting equipment, including bicycles, where weight reduction and durability are essential for enhanced performance.

3. Advantages: Aluminum gears offer several advantages:

  • Lightweight: Aluminum gears contribute to weight reduction in systems, resulting in improved energy efficiency and performance.
  • Corrosion Resistance: Aluminum alloys can exhibit good corrosion resistance, making them suitable for applications where exposure to moisture or harsh environments is a concern.
  • Low Noise: Aluminum gears can help reduce noise levels in gear systems due to their natural damping properties.
  • Heat Dissipation: Aluminum’s high thermal conductivity allows for effective heat dissipation, making it suitable for applications where temperature management is important.
  • Cost-Effective: Aluminum is relatively inexpensive compared to other metals, making aluminum gears a cost-effective option for various applications.

4. Limited Load Capacity: It’s important to note that aluminum gears have lower strength compared to steel gears, limiting their load-carrying capacity. They are typically used in applications with lighter loads and lower torque requirements.

5. Proper Lubrication: Lubrication is crucial for aluminum gears to minimize friction and wear. It’s important to use lubricants specifically designed for aluminum gears and follow appropriate maintenance practices to ensure their optimal performance and longevity.

Overall, aluminum gears provide lightweight, corrosion-resistant, and cost-effective solutions for various applications. They are commonly used in automotive, aerospace, robotics, electrical and electronics, and sports equipment industries, among others, where weight reduction, corrosion resistance, and noise reduction are key considerations.

China Best Sales Custom High Precision Stainless Steel Aluminum POM Nylon Plastic Gear wholesaler China Best Sales Custom High Precision Stainless Steel Aluminum POM Nylon Plastic Gear wholesaler
editor by CX 2023-10-21