China factory Ultra-Sturdy Swl Worm Gear Screw Elevator for Rugged Use raw gear

Product Description

 

Product Model SWL2.5, SWL5, SWL10, SWL15, SWL20, SWL25, SWL35, SWL50, SWL100, SWL120
Product Description Basic lifting component, compact structure, small size, light weight, no noise, safe and convenient, flexible use, high reliability, wide power source, multiple supporting functions, long service life
Usage Single or combined use, can accurately control the adjustment of lifting or pushing height according to a certain program, can be directly driven by motor or other power, can also be manual
Lifting Efficiency and Load Capacity Special and advanced technology has been developed to improve the overall performance of the jack
Structural Type Type 1 – Screw moves axially; Type 2 – Screw rotates, nut moves axially
Assembly Type Type A – Screw/nut moves upwards; Type B – Screw/nut moves downwards
Screw Head Type Type 1 structure screw head: Type I (cylindrical), Type II (flange), Type III (threaded), Type IV (flat head); Type 2 structure screw head: Type I (cylindrical), Type III (threaded)
Transmission Ratio Ordinary speed ratio (P), slow speed ratio (M), medium speed ratio (F) can be customized according to user requirements
Lifting Load Capacity 2.5kN, 5kN, 10kN, 15kN, 20kN, 25kN, 35kN, 50kN, 100kN, 120kN
Screw Protection Type 1 structure: basic type (no protection), anti-rotation type (F), with protective cover (Z), anti-rotation and protective cover (FZ); Type 2 structure: basic type (no protection)

Product description: SWL series worm gear screw lift is a basic lifting component with many advantages such as compact structure, small volume, light weight, no noise, safety and convenience, flexible use, high reliability, wide power source, many supporting functions and long service life. It can be used singly or in combination, can adjust the height of lifting or advancing accurately according to certain procedures, and can be driven directly by electric motor or other power, or manually. In order to improve the efficiency and carrying capacity of SWL series worm gear screw lift, special and advanced technology is developed to improve the comprehensive performance of the lift to meet the requirements of the majority of customers. SWL series worm gear screw lift has different structure types and assembly types, and the lifting height can be customized according to the user’s requirements.

RFQ

Q:What information should I tell you to confirm speed reducer?

A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.

 

Q:What if I don’t know which gear reducer I need?

A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

 

Q:What should I provide if I want to order NON-STANDERD speed reducers?

A: Drafts, Dimensions, Pictures and samples if possible.

 

Q:What is the MOQ?

A: It is OK for 1 or small pieces trial order for quality testing.

 

Q:How long should I wait for the feedback after I send the inquiry?

A: Within 6 hours

 

Q:What is the payment term?

A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc
 

Standard or Nonstandard: Nonstandard
Application: Electric Cars, Motorcycle, Marine, Agricultural Machinery, Car
Spiral Line: Right-Handed Rotation
Head: Single Head
Reference Surface: Toroidal Surface
Type: ZK Worm
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

How do you maintain and service a screw gear system?

Maintaining and servicing a screw gear system, also known as a worm gear system, is essential to ensure its optimal performance, longevity, and reliability. Regular maintenance and proper servicing help identify and address issues before they escalate into major problems. Here’s a detailed explanation of how to maintain and service a screw gear system:

  1. Establish a Maintenance Schedule: Create a maintenance schedule for the screw gear system based on the manufacturer’s recommendations, operating conditions, and the system’s usage. The schedule should include routine inspections, lubrication, cleaning, and any other specific maintenance tasks.
  2. Visual Inspection: Regularly inspect the screw gear system visually. Check for any signs of wear, damage, misalignment, or unusual noise or vibration. Look for oil leaks, loose fasteners, or any other visible issues that may affect the performance of the system.
  3. Lubrication: Ensure that the screw gear system is properly lubricated. Monitor the lubricant level and condition regularly. Follow the manufacturer’s guidelines regarding the type of lubricant to use, the recommended viscosity, and the lubrication intervals. Replenish or replace the lubricant as necessary to maintain optimal lubrication and reduce friction.
  4. Cleaning: Keep the screw gear system clean and free from debris, dirt, or contaminants. Regularly clean the gears, shafts, and other components using appropriate cleaning methods and agents. Be careful not to damage any of the components during the cleaning process.
  5. Alignment Check: Periodically check the alignment of the screw gear system. Misalignment can lead to increased wear, reduced efficiency, and premature failure. Ensure that the worm gear and worm wheel are properly aligned axially and radially. If misalignment is detected, make the necessary adjustments to bring the gears back into proper alignment.
  6. Bearing Maintenance: If the screw gear system includes bearings, inspect and maintain them regularly. Check for any signs of wear, excessive play, or noise. Lubricate the bearings according to the manufacturer’s recommendations. Replace any worn or damaged bearings promptly.
  7. Load and Performance Testing: Periodically perform load and performance testing on the screw gear system. This helps assess its functionality, efficiency, and torque capacity. Analyze the test results and compare them to the system’s specifications. If any deviations or performance issues are identified, take appropriate measures to rectify them.
  8. Component Replacement: Over time, certain components of the screw gear system may wear out and require replacement. Keep a record of the system’s maintenance history and track the lifespan of critical components. Replace worn or damaged gears, bearings, seals, or other components as needed to ensure the system’s reliability and performance.
  9. Documentation: Maintain thorough documentation of all maintenance activities, including inspection reports, lubrication records, component replacements, and any repairs or adjustments made. This documentation helps track the system’s maintenance history, identify recurring issues, and plan future maintenance tasks.

It is important to note that the maintenance and service procedures may vary based on the specific screw gear system, its design, and the manufacturer’s recommendations. Therefore, always refer to the manufacturer’s documentation and guidelines for detailed instructions specific to the screw gear system being serviced.

screw gear

Can screw gears be used in both vertical and horizontal orientations?

Yes, screw gears, also known as worm gears, can be used in both vertical and horizontal orientations. The suitability of screw gears for a particular orientation depends on several factors. Here’s a detailed explanation of using screw gears in vertical and horizontal orientations:

Vertical Orientation:

Screw gears can be used in vertical orientations, such as when the worm gear is positioned vertically above or below the worm wheel. However, there are some considerations to keep in mind:

  • Self-Locking Capability: One advantage of screw gears is their self-locking capability, which means they can hold position without additional braking mechanisms. In vertical orientations, this self-locking feature can be beneficial, especially when the load needs to be held in position without the need for external support or brakes.
  • Lubrication: Proper lubrication is crucial in vertical screw gear applications to ensure efficient power transmission and minimize wear. Gravity can affect lubricant distribution, so it is essential to use lubricants with appropriate viscosity and ensure adequate lubrication reaches all gear surfaces even in a vertical configuration.
  • Load and Torque: The weight of the load being transmitted through the screw gear system is an important consideration in vertical orientations. Vertical applications often involve lifting or supporting heavy loads, and the torque requirements can be high. It is important to ensure that the screw gear system is designed to handle the specific load and torque demands of the vertical application.

Horizontal Orientation:

Screw gears can also be used in horizontal orientations, where the worm gear and worm wheel are positioned parallel to the ground. Here are some considerations for using screw gears in horizontal orientations:

  • Lubrication: Proper lubrication is still important in horizontal screw gear applications to minimize friction, wear, and heat generation. The lubricant viscosity and type should be chosen to provide adequate film thickness and reduce sliding friction between the gear surfaces.
  • Efficiency: Screw gears generally have lower mechanical efficiency compared to some other gear types. In horizontal orientations, where efficiency is critical for power transmission, it is important to consider the gear design and material selection to minimize energy losses and maximize the overall system efficiency.
  • Load Distribution: In horizontal orientations, the load distribution between the worm gear and the worm wheel is typically more uniform compared to vertical orientations. This can help reduce tooth stresses and increase the overall stability of the gear system.
  • Mounting and Support: Proper mounting and support of the screw gear system are important in horizontal orientations to ensure alignment and minimize vibrations. Adequate support structures, such as rigid bases or frames, should be used to maintain the gear system’s stability and integrity.

In summary, screw gears can be used in both vertical and horizontal orientations. However, the specific application requirements, including load, torque, lubrication, and efficiency considerations, should be carefully evaluated to ensure the screw gear system is suitable and designed to meet the demands of the particular orientation.

screw gear

What is a screw gear and how does it work?

A screw gear, also known as a worm gear, is a type of gear mechanism that consists of a screw-like gear (called the worm) and a toothed wheel (called the worm wheel or worm gear). The screw gear operates on the principle of a helical screw driving a toothed wheel to transmit rotational motion and power. Here is a detailed explanation of how a screw gear works:

  1. Configuration: The screw gear consists of two main components: the worm and the worm wheel. The worm is a cylindrical gear with a helical thread wrapped around it, resembling a screw. The worm wheel is a toothed wheel that meshes with the worm. The orientation of the helical thread on the worm and the teeth on the worm wheel is typically perpendicular to each other.
  2. Meshing: The worm and the worm wheel mesh together by engaging the helical thread of the worm with the teeth of the worm wheel. The helical thread on the worm acts as a screw, and as the worm rotates, it drives the rotation of the worm wheel. The teeth on the worm wheel provide the necessary contact points for the meshing action.
  3. Transmitting Motion: When the worm rotates, the helical thread transfers rotational motion to the worm wheel. The helical thread of the worm pushes against the teeth of the worm wheel, causing the worm wheel to rotate. The direction of rotation of the worm wheel depends on the helix angle and the direction of rotation of the worm. The gear ratio between the worm and the worm wheel is determined by the number of teeth on the worm wheel and the pitch of the helical thread on the worm.
  4. Mechanical Advantage: One of the key characteristics of a screw gear is its ability to provide a high mechanical advantage or gear ratio. The helical design of the worm and the worm wheel allows for a large number of teeth to be engaged at any given time, resulting in a high gear ratio. This makes screw gears suitable for applications that require a significant reduction in rotational speed or an increase in torque.
  5. Self-Locking: A unique property of screw gears is their self-locking capability. Due to the helical thread design, the friction between the worm and the worm wheel tends to hold the gear system in place when the worm is not rotating. This self-locking characteristic prevents the worm wheel from backdriving the worm. It provides inherent braking or locking action, making screw gears suitable for applications where holding position or preventing reverse rotation is necessary.
  6. Efficiency and Lubrication: Screw gears generally have lower efficiency compared to other types of gears due to the sliding action between the helical thread and the teeth of the worm wheel. The sliding motion results in higher friction and heat generation. Proper lubrication is essential to minimize wear and improve efficiency. Lubricants with good adhesion and boundary lubrication properties are commonly used for screw gears.

Screw gears are widely used in various applications, including machinery, automotive systems, conveyor systems, lifting equipment, and many others. Their unique characteristics of high gear ratio, self-locking capability, and compact design make them suitable for specific applications where precise motion control, torque multiplication, or holding position is required.

China factory Ultra-Sturdy Swl Worm Gear Screw Elevator for Rugged Use raw gearChina factory Ultra-Sturdy Swl Worm Gear Screw Elevator for Rugged Use raw gear
editor by CX 2023-09-28