China Hot selling M49 Series Gear Reducer Suitable for Screw Conveyor and Feeder worm gear motor

Product Description

Product Description

DESCRIPTION:
Gear reducers are enclosed helical gears with hollow inputs.
The gear is mounted directly on the input shaft of the gear and receives support from a motor mounting bracket mounted on the machine housing. 
No additional parts are required to transfer torque from the reducer to the machine.
It can be mounted in vertical, horizontal or inclined position.
Shaft-mounted gear reducers typically have 5:1 7:1 10:1 reduction ratios and output speeds ranging from 1 to 300 rpm.

M4 series gear reducer can be installed directly on screw conveyors and feeders with a XUH seal installed on the output shaft of the gearbox. 
Ensure that cement, and fly ash powder will not get into the gearbox and extend the service life of the gearbox.
More suitable for bulk materials, grain and aggregate handling industries

 

WORKING PRINCIPLE:
M4 series gearboxes come in 5 sizes (M41 / M43 / M45 / M47 / M49). 
Nominal gear ratios are in accordance with Ra 10 CHINAMFG 2017 (5, 6, 7, 10). Cylindrical gears with helicoidal teeth. 
M4 series gearboxes can be mounted directly on screws: in this case, the XUH type output shaft seal is usually installed. 
M4 series gearboxes are supplied with grease for use at ambient temperatures (0°C – 40°C).

PROPERTIES:
– Helical gearbox
– Nominal torque that can be transferred to the output shaft: up to 1500 Nm.
– Installed power at the input up to 30 kW.
– Operation at ambient temperature (0°C – 40°C).
– DIN 5482 involute spline output shafts
– Flange mounting on motor and output side
– Precision-machined cylindrical bevel gears with teeth.
– Flange mounting on motor and output side

BENEFITS:
– Easy installation
– Quick maintenance
– Low installation costs

 

 

 

Services

 

Pre-sales Commitment

1. For user inquiries, quick response, warm reception, and answer all questions.
2. Provide detailed design information free of charge within 24 hours.

Commitment in Sales

1. All ex-factory products meet the quality standards specified in the contract. All products are tested according to customer requirements before delivery.
2. After the contract is signed, the customers are welcome to the site of our company for supervision.

After-sales Commitment

1. We provide technical support for customers. If necessary, the product can be debugged on-site, and relevant operators can be trained to solve user problems.
2.  24 hours to solve the problems for customers. Product use a day, a day of service.
3. Set up a high-quality service team, and set up product files for regular return visits.

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Four-Step
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

screw gear

How do you address noise and vibration issues in a screw gear system?

Noise and vibration issues in a screw gear system can affect its performance, efficiency, and overall reliability. Addressing these issues is crucial to ensure smooth and quiet operation. Here’s a detailed explanation of how to address noise and vibration issues in a screw gear system:

  • Gear Design: The design of the screw gear system plays a significant role in minimizing noise and vibration. Proper gear tooth profile and geometry can help reduce meshing impact and ensure smooth engagement between the worm gear and the worm wheel. The selection of appropriate gear materials and surface finishes can also influence noise and vibration levels.
  • Gear Quality: High-quality manufacturing processes are essential to minimize noise and vibration in a screw gear system. Precise machining, grinding, and finishing techniques can help achieve accurate gear tooth profiles and reduce tooth surface irregularities. Using high-quality materials with appropriate hardness and strength can also contribute to smoother gear operation and reduced noise levels.
  • Lubrication: Adequate lubrication is crucial for reducing friction, wear, and noise in a screw gear system. Proper lubricant selection, considering factors such as viscosity and additives, can help minimize contact stresses and dampen vibrations. Regular lubricant maintenance, including monitoring oil levels and contamination, is necessary to ensure optimal performance and noise reduction.
  • Mounting and Alignment: Proper mounting and alignment of the screw gear system are essential to minimize noise and vibration. Misalignment or improper installation can cause uneven loading, increased friction, and excessive wear, leading to noise generation. Ensuring accurate alignment and proper mounting techniques, such as using precision shims and torque specifications, can significantly reduce noise and vibration levels.
  • Isolation and Damping: Implementing effective isolation and damping measures can help mitigate noise and vibration in a screw gear system. This can include using vibration-damping materials or isolating the system from surrounding structures using resilient mounts or bushings. Adding damping elements, such as rubber or elastomeric coatings, to critical components can also absorb vibrations and reduce noise transmission.
  • Load Distribution: Uneven load distribution can contribute to noise and vibration in a screw gear system. Optimizing the load distribution by adjusting gear parameters, such as the number of threads or the tooth lead angle, can help achieve a more balanced load sharing between the worm gear and the worm wheel. This can minimize tooth stresses and vibrations, resulting in reduced noise levels.
  • Regular Maintenance and Inspection: Ongoing maintenance and inspection are crucial for identifying and addressing potential noise and vibration issues in a screw gear system. Regularly checking for wear, damage, or misalignment, as well as monitoring noise and vibration levels, can help detect and resolve problems before they escalate. Prompt maintenance actions, such as lubricant replacement or gear realignment, can help maintain optimal system performance and reduce noise and vibration.

By implementing these measures, engineers and technicians can effectively address noise and vibration issues in a screw gear system, ensuring quieter operation, improved reliability, and enhanced overall performance.

screw gear

Can screw gears be used in both vertical and horizontal orientations?

Yes, screw gears, also known as worm gears, can be used in both vertical and horizontal orientations. The suitability of screw gears for a particular orientation depends on several factors. Here’s a detailed explanation of using screw gears in vertical and horizontal orientations:

Vertical Orientation:

Screw gears can be used in vertical orientations, such as when the worm gear is positioned vertically above or below the worm wheel. However, there are some considerations to keep in mind:

  • Self-Locking Capability: One advantage of screw gears is their self-locking capability, which means they can hold position without additional braking mechanisms. In vertical orientations, this self-locking feature can be beneficial, especially when the load needs to be held in position without the need for external support or brakes.
  • Lubrication: Proper lubrication is crucial in vertical screw gear applications to ensure efficient power transmission and minimize wear. Gravity can affect lubricant distribution, so it is essential to use lubricants with appropriate viscosity and ensure adequate lubrication reaches all gear surfaces even in a vertical configuration.
  • Load and Torque: The weight of the load being transmitted through the screw gear system is an important consideration in vertical orientations. Vertical applications often involve lifting or supporting heavy loads, and the torque requirements can be high. It is important to ensure that the screw gear system is designed to handle the specific load and torque demands of the vertical application.

Horizontal Orientation:

Screw gears can also be used in horizontal orientations, where the worm gear and worm wheel are positioned parallel to the ground. Here are some considerations for using screw gears in horizontal orientations:

  • Lubrication: Proper lubrication is still important in horizontal screw gear applications to minimize friction, wear, and heat generation. The lubricant viscosity and type should be chosen to provide adequate film thickness and reduce sliding friction between the gear surfaces.
  • Efficiency: Screw gears generally have lower mechanical efficiency compared to some other gear types. In horizontal orientations, where efficiency is critical for power transmission, it is important to consider the gear design and material selection to minimize energy losses and maximize the overall system efficiency.
  • Load Distribution: In horizontal orientations, the load distribution between the worm gear and the worm wheel is typically more uniform compared to vertical orientations. This can help reduce tooth stresses and increase the overall stability of the gear system.
  • Mounting and Support: Proper mounting and support of the screw gear system are important in horizontal orientations to ensure alignment and minimize vibrations. Adequate support structures, such as rigid bases or frames, should be used to maintain the gear system’s stability and integrity.

In summary, screw gears can be used in both vertical and horizontal orientations. However, the specific application requirements, including load, torque, lubrication, and efficiency considerations, should be carefully evaluated to ensure the screw gear system is suitable and designed to meet the demands of the particular orientation.

screw gear

How do screw gears contribute to linear motion and power transmission?

Screw gears, also known as worm gears, play a significant role in achieving linear motion and power transmission in various mechanical systems. Here’s a detailed explanation of how screw gears contribute to these functions:

Linear Motion:

Screw gears can convert rotary motion into linear motion or vice versa through the interaction between the worm and the worm wheel. The helical threads on the worm and the teeth on the worm wheel create a sliding and rolling contact that results in linear displacement along the axis of the screw. This mechanism enables precise control and positioning of linear motion in different applications.

The linear motion contribution of screw gears can be observed in the following scenarios:

  • Lead Screw Mechanisms: When the worm gear is used as a lead screw, it converts the rotary motion of the worm into linear motion along the screw’s axis. By rotating the worm, the worm wheel moves linearly, allowing for controlled and precise linear positioning. Lead screw mechanisms are widely used in applications such as CNC machines, 3D printers, and linear actuators.
  • Linear Motion Conversion: In certain applications, the linear motion of a load can be converted into rotary motion using screw gears. By fixing the worm wheel and applying linear force to the worm, the rotation of the worm can drive the rotary motion of other components. This conversion is utilized in applications such as conveyor systems, lifting mechanisms, and material handling equipment.

Power Transmission:

Screw gears are effective in power transmission due to their unique characteristics. Here’s how they contribute to power transmission:

  • Gear Reduction: Screw gears provide significant gear reduction, which is the ratio between the input speed and the output speed. This reduction allows for a smaller input speed to generate a larger output torque, making screw gears suitable for applications requiring high torque and low-speed rotation. The gear reduction capability of screw gears enables efficient power transmission, especially in scenarios where high torque is necessary.
  • Torque Multiplication: Through the interaction of the helical threads on the worm and the teeth on the worm wheel, screw gears multiply torque. The mechanical advantage gained through the screw gear mechanism enables the transmission of higher torque to drive loads with increased force. This torque multiplication is essential in applications that require heavy lifting, load handling, and power transmission with minimal slippage.

By combining the ability to convert rotary motion into linear motion and providing efficient power transmission, screw gears find widespread use in a range of applications. They are employed in industries such as manufacturing, automation, robotics, material handling, and various other systems that require precise linear motion control and effective power transmission.

China Hot selling M49 Series Gear Reducer Suitable for Screw Conveyor and Feeder worm gear motorChina Hot selling M49 Series Gear Reducer Suitable for Screw Conveyor and Feeder worm gear motor
editor by CX 2023-10-26