China manufacturer Wheel Loader Axle Ring Gear for CZPTCZPT worm gear motor

Product Description

NAME MODEL   NOTE
oil filter     Engine Model C6121
Fuel Filter     Engine Model C6121
Air Filter     Engine Model WD615 WD10
oil filter     Engine Model WD615 WD10
Fuel Filter     Engine Model WD615 WD10
Fuel Filter     Engine Model WD615 WD10
Air Filter     Engine Model TD226B
oil filter     Engine Model TD226B
Fuel Filter     Engine Model TD226B
Filter     hydraulic system
transmission filter     ZF4WG180  4WG200
convert filter       
back oil filter  FL936    
back oil filter      
filter      
combination lamp switch      
Left Front Lamp      
Right Front Lamp      
hand brake valve      
power switch       
combination valve FL936 FL958 FL956    
door lock  FL936 FL958 FL956    
stater switch FL936 FL958 FL956    
Air-conditioning compressor FL936 FL958 FL956    
steering cylinder seal kit FL958G    
Bucket cylinder seal kit FL958G    
Boom cylinder seal kit FL958G    
steering cylinder seal kit FL956    
Bucket cylinder seal kit FL956    
Boom cylinder seal kit FL956    
steering cylinder seal kit FL936    
Bucket cylinder seal kit FL936    
Boom cylinder seal kit FL936    
MIRROR (with Frame) FL936 FL958 FL956    
MIRROR (without Frame) FL936 FL958 FL956    
air booster pump FL936    
brake pads(stype 1) widely used for CZPT CZPT CZPT XGMA…    
brake pads(stype 2) widely used for CZPT CZPT CZPT XGMA…    
brake caliper (stype 1) widely used for CZPT CZPT CZPT XGMA…    
brake caliper (stype 2) widely used for CZPT CZPT CZPT XGMA…    
Brake caliper piston (stype 1) widely used for CZPT CZPT CZPT XGMA…    
Brake caliper piston (stype 2) widely used for CZPT CZPT CZPT XGMA…    
FRONT DRIVEN SHAFT FL936    
MIDDLE DRIVEN SHAFT support FL936    
REAR DRIVEN SHAFT FL936    
MAIN DRIVEN SHAFT FL936    
speed pump widely used for CZPT CZPT CZPT XGMA…   ZL40 50
speed control valve widely used for CZPT CZPT CZPT XGMA…   ZL40 50
input gear  widely used for CZPT CZPT CZPT XGMA…   ZL40 50 transmission
over clutch assy widely used for CZPT CZPT CZPT XGMA…   ZL40 50 transmission
oil pan  widely used for CZPT CZPT CZPT XGMA…   ZL40 50 transmission
  widely used for CZPT CZPT CZPT XGMA…   ZL40 50 transmission
  widely used for CZPT CZPT CZPT XGMA…   ZL40 50 transmission
driving shaft, steering punp widely used for CZPT CZPT CZPT XGMA…   ZL40 50 transmission
shaft gear  widely used for CZPT CZPT CZPT XGMA…   ZL40 50 transmission
first gear piston widely used for CZPT CZPT CZPT XGMA…    
first gear inner rim widely used for CZPT CZPT CZPT XGMA…    
sun gear  widely used for CZPT CZPT CZPT XGMA…    
frictional plate spacing bracket widely used for CZPT CZPT CZPT XGMA…    
pinion carrier astern widely used for CZPT CZPT CZPT XGMA…    
piston  widely used for CZPT CZPT CZPT XGMA…    
thrust plate      
driving plate      
cylinder      
transmission gasket seal kit used for CZPT CZPT CZPT LONKING…    
brake disk FL958 FL956 CZPT LG956 LG958 LG953    
brake disk FL936 CZPT LG936    
brake disk FL936 LW300FN    
PLANET PINION CARRIER FL956 FL958 CZPT LG956    
PLANET PINION CARRIER FL936 LG936    
PLANET GEAR FL956 FL958 CZPT LG956    
PLANET GEAR FL936 LG936    
PLANET PINION SHAFT FL956 FL958 CZPT LG956    
PLANET PINION SHAFT FL936 LG936    
ROLLER PIN 5X45 FL956 FL958 CZPT LG956    
ROLLER PIN 4X38 FL936 LG936    
sun gear  FL956 FL958 CZPT LG956    
sun gear  FL936 LG936    
bolt and nut for Wheel rim FL956 FL958 CZPT LG956    
bolt and nut for Wheel rim FL936 LG936    
AXLE RING GEAR FL956 FL958 CZPT LG956    
AXLE RING GEAR FL936 LG936    
FRONT MAIN DRIVE FL956 FL958 CZPT LG956    
FRONT MAIN DRIVE LG936    
FRONT MAIN DRIVE FL936    
bevel gear assy FL956 FL958 CZPT LG956    
bevel gear assy LG936    
bevel gear assy FL936    
GEAR PINION FL956 FL958 CZPT LG956    
GEAR PINION LG936    
GEAR PINION FL936    
half shaft gear FL956 FL958 CZPT LG956    
half shaft gear LG936    
half shaft gear FL936    
CROSS AXLE FL956 FL958 CZPT LG956    
CROSS AXLE LG936    
CROSS AXLE FL936    
differential assy FL956 FL958 CZPT LG956    
differential assy LG936    
differential assy FL936    
air booster pump FL958 FL956    
air booster pump FL936    
air booster pump SDLG LG933 LG936    
air booster pump SDLG LG953 LG956 LG958    
engine oil pressure sensor FL958 FL956    
reverse light switch FL956 FL958 FL936    
reverse horn  FL956 FL958 FL936    
speaker horn FL956 FL958 FL936    
air pressure meter  SDLG CZPT CZPT CZPT ALL USED    
Voltage Meter SDLG CZPT CZPT CZPT ALL USED    
engine oil pressure SDLG CZPT CZPT CZPT ALL USED    
fuel meter  SDLG CZPT CZPT CZPT ALL USED    
water temperature meter  SDLG CZPT CZPT CZPT ALL USED    
Oil  temperature meter  SDLG CZPT CZPT CZPT ALL USED    
alternator FL936  LG936    
alternator FL956 FL958 LG953 LG956 LG958    
alternator FL958G LG956L    
stater FL936  LG936    
stater FL956 FL958 LG953 LG956 LG958    
stater FL958G LG956L    
upper hinge pin FL936   Frame Hinged system
cover for upper hinge pin FL936    
nut for upper hinge pin FL936    
seal for upper hinge pin  FL936    
lower hinge pin  FL936    
seal for lower hinge pin  FL936    
cover for lower hinge pin  FL936    
bearing for upper and lower hinge pins FL936    
       
upper hinge pin FL958    
lower hinge pin       
Break Pads SDLG CZPT CZPT CZPT LONKING    
Break Pads SDLG CZPT CZPT CZPT LONKING    
Break Pads ONLY FOR LiuGong     
Break Caliper  SDLG CZPT CZPT CZPT LONKING    
Break Caliper  SDLG CZPT CZPT CZPT LONKING    
Break Caliper  ONLY FOR LiuGong    
middle teeth     LiuGong ZL50C CLG856 CLG862
right side teeth     LiuGong ZL50C CLG856 CLG862
left side teeth     LiuGong ZL50C CLG856 CLG862
teeth sleeve     LiuGong ZL50C CLG856 CLG862
widely Used For CZPT CZPT CZPT …5T Wheel loader     Head gasket
widely Used For CZPT CZPT CZPT …5T Wheel loader     All The Seal Kit
widely Used For CZPT CZPT CZPT …5T Wheel loader     Head gasket
widely Used For CZPT CZPT CZPT …5T Wheel loader     All The Seal Kit
widely Used For CZPT CZPT CZPT …3T Wheel loader     Head gasket
widely Used For CZPT CZPT CZPT …3T Wheel loader     All The Seal Kit
widely Used For CZPT CZPT CZPT …3T Wheel loader     Head gasket
widely Used For CZPT CZPT CZPT …3T Wheel loader     All The Seal Kit

HangZhou CZPT Mechanical & Electrical Equipment Co. Ltd, the authorized dealer of
Cummins (China) Investment Co., Ltd (CCI), established in 2015 by Mr. Jordan Wang who had rich experience in CZPT engine, CZPT generator and related market,  especially mine, O&G, marine, construction machinery, etc., as a sales director,Jordan worked in CZPT for 8 years.
 
Raptors specializes in supplying CZPT all series genuine parts and engine whole goods, such as B/QSB3.3, ISF2.8/3.8, ISG, ISB/QSB4.5, 6BT,6CT, ISB/QSB6.7,QSL9, QSM/ISM/M11, NTA855, QSX15, QSK19, QSK23, VTA28, QST30, KTA19, KTA38, KAT50, QSK60,QSK78,etc;
 
Jordan had been responsible for mine market for 4 years during working in CZPT china, so CZPT has very good relationship with CZPT who is the joint venture with TEREX, could supply CZPT parts, such as parts for 3305, 3307, TR50, TR60, TR100, and MT3600, MT3700, NTE150, NTE200, NTE240, NTE260; also supplying construction machinery parts from SANY, XCMG, LIUGONG, XIHU (WEST LAKE) DIS., SDLG, CZPT and CZPT etc.
 
Raptors, located in No. 789, Xihu (West Lake) Dis. Road, East of Xihu (West Lake) Dis. Industry, HangZhou, ZheJiang ,
China (Mainland), is just 2 km away from CZPT (China) Investment Co., Ltd,
HangZhou Branch, We could make sure the fast delivery and enough inventories, also reasonable price.
 
Our business scopes:
1, CZPT genuine parts and engine overhaul
2, ZheJiang Fleet guard filters and US Fleet guard filters.
3, HOLSET turbocharger series
4, China CZPT parts series
5, construction machinery parts
 

Thanks for the high quality, fast delivery, reasonable price, CZPT already exported to Finland, Sweden, Germany, Netherland, Czech Republic, France, Romania,
Malaysia, Indonesia, Thailand, Libya, UAE, IRAN, Algeria, etc. if interested in any of our products, please contact us right now; we are always serving you at any time.

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Soft Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Cast Gear
Toothed Portion Shape: Spur Gear
Material: Cast Iron
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

ring gear

What is the purpose of using ring gears in machinery?

Ring gears serve multiple purposes and offer various advantages when used in machinery. Here’s a detailed explanation of the purpose of using ring gears:

  • Power Transmission: One of the primary purposes of ring gears in machinery is to facilitate power transmission. Ring gears, along with other meshing gears, transmit torque and rotational motion from the driving gear to the driven components or systems. They enable the transfer of power from a power source to various parts of the machinery, driving the movement and operation of different mechanisms and processes.
  • Gear Ratio Control: Ring gears allow for precise control over the gear ratio in machinery. By adjusting the size of the ring gear and its meshing gears, different gear ratios can be achieved. Gear ratios determine the relationship between the rotational speeds and torques of the driving and driven gears. This ability to control the gear ratio enables machinery to operate at desired speeds, optimize torque output, and adapt to specific application requirements.
  • Mechanical Advantage: Ring gears provide a mechanical advantage in machinery. By leveraging the gear ratio control mentioned above, ring gears can amplify or reduce the torque output of the power source. This mechanical advantage allows machinery to generate higher forces or torques than the original power source alone. It enables the machinery to handle heavy loads, perform tasks requiring significant force, and enhance overall operational efficiency.
  • Load Distribution: Ring gears contribute to load distribution within machinery. The meshing teeth of the ring gear engage with multiple teeth of other gears, distributing the transmitted loads across these meshing points. This load distribution helps prevent excessive stress concentration on specific gear teeth, ensuring even wear and reducing the risk of gear failure. By distributing the load, ring gears enhance the overall durability and reliability of the machinery.
  • Motion Control: Ring gears play a crucial role in motion control within machinery. By transmitting rotational motion, ring gears enable precise movement and synchronization of various components and mechanisms. They ensure that different parts of the machinery operate in a coordinated manner, allowing for smooth and controlled motion. Ring gears contribute to accurate positioning, speed regulation, and overall motion precision in machinery.
  • Compact Design: Ring gears offer a compact design solution. Due to their annular shape, they can be integrated into machinery with limited space. The compactness of ring gears is particularly beneficial in applications where space constraints are a concern. Their small footprint allows for efficient use of available space, enabling the design of more compact and lightweight machinery without sacrificing power transmission capabilities.
  • Versatile Applications: Ring gears find wide applications across various industries and machinery types. They are used in automotive transmissions, industrial machinery, robotics, aerospace systems, power generation equipment, and more. The versatility of ring gears stems from the ability to configure them in different types, such as external or internal ring gears, helical gears, or bevel gears. This versatility makes ring gears adaptable to a wide range of machinery designs and requirements.

By serving these purposes, ring gears contribute to the efficient and reliable operation of machinery. They enable power transmission, gear ratio control, mechanical advantage, load distribution, motion control, and compact design, making them essential components in various mechanical systems.

ring gear

How do you prevent backlash and gear play in a ring gear mechanism?

Preventing backlash and gear play in a ring gear mechanism is crucial for ensuring accurate and precise operation. Here’s a detailed explanation of how to prevent backlash and gear play in a ring gear mechanism:

  • Precise Gear Design: The design of the ring gear and associated gears should be carefully engineered to minimize backlash. This involves selecting appropriate tooth profiles and gear geometry that promote proper meshing and minimize clearance between the gear teeth. The gear design should consider factors such as tooth thickness, pressure angle, and tooth contact ratio to achieve optimal gear meshing without excessive play.
  • Tight Manufacturing Tolerances: Close manufacturing tolerances are essential to reduce backlash in a ring gear mechanism. The gear components, including the ring gear and mating gears, should be produced with high precision to ensure accurate tooth dimensions and minimize any gaps or play between the gear teeth. Tight manufacturing tolerances help achieve a tighter meshing fit, reducing backlash and gear play.
  • Proper Gear Alignment: Accurate alignment of the ring gear and mating gears is crucial for minimizing backlash. The gears should be properly aligned along their axes to ensure precise engagement and minimize any misalignment that can contribute to play. Adequate alignment can be achieved through careful assembly techniques, such as using alignment fixtures, proper shimming, and precision measurement tools.
  • Preload or Pre-tension: Applying preload or pre-tension to the ring gear mechanism can help reduce backlash and gear play. Preload involves applying a slight compressive force or tension to eliminate any clearance or gaps between the gear teeth during operation. This can be achieved through various methods, such as using spring-loaded components, adjustable shims, or axial preloading devices.
  • Optimized Lubrication: Proper lubrication is essential for reducing friction and minimizing gear play. Lubricants with appropriate viscosity and film strength should be used to ensure smooth gear operation and reduce any unwanted movement or play between the gear teeth. Regular lubricant maintenance, such as monitoring oil levels and replenishing or replacing lubricants as needed, helps maintain optimal lubrication conditions and minimize backlash.
  • Mechanical Backlash Compensation: In some applications, mechanical compensation mechanisms can be employed to actively compensate for any residual backlash. These mechanisms can include systems with adjustable clearances, anti-backlash devices, or dual-gear arrangements that counteract the effects of backlash. Mechanical backlash compensation techniques can help maintain precise positioning and eliminate any undesired play in the gear mechanism.

By implementing these measures, it is possible to significantly reduce or eliminate backlash and gear play in a ring gear mechanism. Careful gear design, tight manufacturing tolerances, proper alignment, preload or pre-tension, optimized lubrication, and mechanical compensation techniques all play a role in ensuring accurate and precise operation of the ring gear mechanism.

ring gear

Can you explain the concept of meshing with a ring gear?

Meshing with a ring gear refers to the process of engaging and interlocking the teeth of a gear with the internal teeth of a ring gear. It is a fundamental concept in gear systems where the rotation and torque transfer occur between two gears. Here’s a detailed explanation of the concept of meshing with a ring gear:

When two gears come into contact and their teeth interlock, they are said to be meshing. In the case of a ring gear, the meshing occurs when the teeth of an external gear, such as a pinion gear, engage with the internal teeth of the ring gear. The teeth of the pinion gear fit precisely between the teeth of the ring gear, creating a mechanical connection.

The process of meshing involves several important considerations:

  • Tooth Engagement: Proper tooth engagement is crucial for efficient and smooth meshing. The teeth of the gears must align correctly to ensure a proper fit. This alignment ensures that the teeth make contact at the correct pitch point and maintain a consistent mesh throughout the gear rotation.
  • Tooth Profile: The tooth profile, such as the shape and size of the teeth, is designed to facilitate smooth meshing. The profile ensures that the teeth slide smoothly against each other without excessive friction, noise, or wear. The tooth profile also affects the load distribution, torque transmission, and overall performance of the gear system.
  • Lubrication: Lubrication plays a crucial role in the meshing process. It helps reduce friction and wear between the teeth, ensuring smooth operation and preventing damage to the gears. Proper lubrication also helps dissipate heat generated during meshing, improving the overall efficiency and reliability of the gear system.
  • Clearance and Backlash: Clearance and backlash are important considerations in gear meshing. Clearance refers to the space between the tips of the teeth of the external gear and the root of the teeth of the ring gear. Backlash is the amount of play or movement between the engaged teeth. Proper clearance and backlash are necessary to prevent interference, ensure smooth rotation, and accommodate any misalignment or thermal expansion that may occur during operation.

The quality of the meshing directly affects the performance, efficiency, and reliability of the gear system. Proper design, manufacturing precision, and maintenance practices are essential to achieve optimal meshing between gears, including ring gears.

It’s important to note that the specific parameters and requirements for meshing, such as tooth geometry, clearance, backlash, and lubrication, may vary depending on the application, gear type, and operating conditions.

China manufacturer Wheel Loader Axle Ring Gear for CZPTCZPT worm gear motorChina manufacturer Wheel Loader Axle Ring Gear for CZPTCZPT worm gear motor
editor by CX 2023-09-12