Product Description
High Precision Plastic Nylon Aluminum Stainless Steel Transmission Spur Gear
Gear transmission relies on the thrust between gear teeth to transmit motion and power, also known as meshing transmission. With this gradual meshing, helical gears operate much more smoothly and quietly than spur gears. Therefore, almost all automobile transmissions use helical gears.Since the teeth on the helical gear present a certain angle, the gears will be under a certain amount of stress when they mesh. Equipment using helical gears is equipped with bearings to withstand this pressure.
Product Description
| Product name | Worm Gear and Worm Wheel & Nylon Gear |
| Materials Available | Stainless Steel, Carbon Steel, Brass, Bronze, Iron, Aluminum Alloy,Copper,Plastic etc |
| Heat Treatment | Quenching & Tempering, Carburizing & Quenching, High-frequency Hardening, Carbonitriding…… |
| Surface Treatment | Carburizing and Quenching,Tempering ,Tooth suface high quenching Hardening,Tempering |
| BORE | Finished bore, Pilot Bore, Special request |
| Processing Method | Molding, Shaving, Hobbing, Drilling, Tapping, Reaming, Manual Chamfering, Grinding etc |
| Pressure Angle | 20 Degree |
| Hardness | 55- 60HRC |
| Size | Customer Drawings & ISO standard |
| Package | Wooden Case/Container and pallet, or made-to-order |
| Certificate | ISO9001:2008 |
| Applications | Electric machinery, metallurgical machinery, environmental protection machinery, electronic and electrical appliances, road construction machinery, chemical machinery, food machinery, light industrial machinery, mining machinery, transportation machinery, construction machinery, building materials machinery, cement machinery, rubber machinery, water conservancy machinery and petroleum machinery |
| Machining Process | Material preparation, normalizing, rough turning, quenching and tempering, semi fine turning outer circle, rough turning spiral surface, fine turning (fine grinding) inner hole end face, keyway, semi fine turning spiral surface, pliers (rest incomplete teeth), semi fine grinding outer circle, semi fine grinding spiral surface, grinding center hole, fine grinding outer circle, fine grinding spiral surface, finished product inspection |
| Advantages | 1. Produce strictly in accordance with ANSI or DIN standard dimension 2. Material: SCM 415 steel 3. Bore: Finished bore 4. Precision grade: DIN 5 to DIN 7 5. Surface treatment: Carburizing and Quenching 6. Module: From 1 to 4 7. Tooth: From Z15 to Z70 |
Specifction:
| Number | Number of Teeth | Shaft Bore Dia. AH7 (1mm Increment) | Twisting Direction | B | C | D | E | F | G | ||
| Type | Module | Straight Bore Straight Bore+Tap | Keyway+Tap | ||||||||
| Straight Bore
Straight Bore+Tap Keyway+Tap |
1.0 | 20 | 6 | 8 | L(Left)
R(Right) |
17 | 20 | 22 | 8 | 10 | 18 |
| 22~ 28 | 8 | 8~13 | 18~20 | 22~28 | 24~30 | ||||||
| 30~48 | 10 | 10~17 | 25~30 | 30~48 | 32~50 | ||||||
| 50~70 | 12 | 12~17 | 35~40 | 50~70 | 52~72 | ||||||
| 80~100 | 15 | 15~30 | 50 | 80~100 | 82~102 | ||||||
| 1.5 | 20~26 | 12 | 12~17 | 24~32 | 30~39 | 33~42 | 12 | 12 | 24 | ||
| 28~44 | 15 | 15~30 | 36~50 | 42~67.5 | 45~70.5 | ||||||
| 45~52 | 18 | 18~40 | 50~60 | 72~78 | 75~81 | ||||||
| 60~100 | 20 | 20-50 | 60~70 | 90~150 | 93·153 | ||||||
| 2.0 | 15~18 | 12 | 12~17 | 24~30 | 30~36 | 34~40 | 16 | 13 | 29 | ||
| 20~28 | 15 | 15·22 | 32~45 | 40~56 | 44~60 | ||||||
| 30~36 | 18 | 18~40 | 50 | 60~72 | 64~76 | ||||||
| 40~48 | 20 | 20~44 | 60 | 80~96 | 84~100 | ||||||
| 50~100 | 25 | 25~60 | 60~100 | 100~200 | 104~204 | ||||||
| 2.5 | 15~18 | 15 | 15~30 | 30~38 | 37.5~45 | 42.5~50 | 20 | 14 | 34 | ||
| 20~24 | 18 | 18~40 | 40~48 | 50~60 | 55~65 | ||||||
| 25~36 | 20 | 20~50 | 50~70 | 62.5~90 | 67.5~95 | ||||||
| 40~60 | 25 | 25~70 | 70~80 | 90~150 | 95~155 | ||||||
| 3.0 | 15~18 | 18 | 18~22 | 36~40 | 45~54 | 51~60 | 25 | 16 | 4 | ||
Company Profile
Packaging & Shipping
FAQ
| Main Markets? | North America, South America, Eastern Europe , West Europe , North Europe, South Europe, Asia |
| How to order? | * You send us drawing or sample |
| * We carry through project assessment | |
| * We give you our design for your confirmation | |
| * We make the sample and send it to you after you confirmed our design | |
| * You confirm the sample then place an order and pay us 30% deposit | |
| * We start producing | |
| * When the goods is done, you pay us the balance after you confirmed pictures or tracking numbers. | |
| * Trade is done, thank you!! |
If you are interested in our products, please tell us which materials, type, width, length u want.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Toy, Agricultural Machinery, Textile Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | External Gear |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | S45c |
| Samples: |
US$ 13/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do aluminum gears perform in different environments?
The performance of aluminum gears in different environments can vary depending on several factors. Here’s a detailed explanation:
1. Corrosive Environments: Aluminum gears generally offer good corrosion resistance, especially when compared to materials like steel. They can perform well in environments where exposure to moisture, chemicals, or corrosive substances is common. However, in highly acidic or alkaline environments, aluminum may not provide sufficient corrosion resistance, and alternative materials or protective coatings may be required.
2. High-Temperature Environments: Aluminum has a relatively low melting point compared to some other metals. In high-temperature environments, aluminum gears can experience thermal expansion, which may affect their dimensional stability and operating characteristics. Additionally, prolonged exposure to high temperatures can weaken aluminum alloys and reduce their mechanical properties. Therefore, in applications involving high temperatures, careful consideration of alloy selection and thermal management measures is necessary.
3. Low-Temperature Environments: Aluminum gears generally perform well in low-temperature environments. They exhibit good ductility and toughness even at low temperatures, allowing them to withstand sub-zero conditions without significant loss of performance. This makes aluminum gears suitable for applications in cold climates or environments.
4. High-Humidity Environments: Aluminum gears can tolerate high humidity environments without significant performance degradation. However, there is a risk of moisture absorption by the aluminum material, which can lead to galvanic corrosion or degradation of lubricating properties. Proper sealing, lubrication, and preventive maintenance practices are important to mitigate these risks.
5. Abrasive Environments: In environments where gears are exposed to abrasive particles or high levels of wear, aluminum gears may not offer the same level of wear resistance as materials like steel or hardened alloys. The relatively softer nature of aluminum can result in accelerated wear or damage to the gear teeth. In such cases, surface treatments, coatings, or alternative materials may be necessary to enhance wear resistance.
6. Electrical Environments: Aluminum is an electrically conductive material. In electrical environments, there is a possibility of electrical arcing or the formation of galvanic couples with dissimilar metals. Proper insulation, grounding, and preventive measures should be implemented to avoid any adverse effects on gear performance or electrical systems.
It’s important to consider the specific environmental conditions and requirements of the gear application when assessing the performance of aluminum gears. In many cases, aluminum gears can perform satisfactorily in various environments with proper design, material selection, lubrication, and maintenance practices. However, for extreme or highly specialized environments, alternative materials or additional protective measures may be necessary.
In summary, the performance of aluminum gears in different environments depends on factors such as corrosion resistance, temperature effects, humidity, abrasion resistance, electrical properties, and specific application considerations. Understanding these factors and implementing appropriate measures ensures optimal performance and durability of aluminum gears in diverse environmental conditions.
Are there specific design considerations for using aluminum gears?
Using aluminum gears requires specific design considerations. Here’s a detailed explanation:
1. Material Selection: Aluminum alloys have different mechanical properties and characteristics. When designing aluminum gears, it’s important to select an alloy that meets the specific requirements of the application. Factors to consider include the desired strength, hardness, wear resistance, corrosion resistance, and thermal conductivity of the gear. The selected alloy should be suitable for the operating conditions and loads expected in the application.
2. Strength and Load Capacity: Aluminum is generally not as strong as some other materials like steel or cast iron. Therefore, when designing aluminum gears, it’s important to carefully consider the anticipated loads and stresses they will experience. Structural analysis, such as finite element analysis (FEA), can help determine the gear’s load capacity and structural integrity. Reinforcement techniques or incorporating additional support structures may be necessary in high-load applications.
3. Heat Dissipation: Aluminum has good thermal conductivity, which allows it to dissipate heat effectively. However, in applications where gears generate significant heat, thermal management becomes critical. Designing gear systems with proper cooling mechanisms, such as fins, heat sinks, or forced air circulation, can help prevent overheating and maintain optimal operating temperatures for the aluminum gears.
4. Gear Geometry: The design of aluminum gears should consider factors such as tooth profile, module, pressure angle, and tooth thickness. The gear geometry affects the gear’s load-carrying capacity, efficiency, noise level, and overall performance. It’s important to ensure proper tooth engagement, minimize stress concentrations, and optimize gear meshing characteristics to achieve the desired functionality and durability.
5. Lubrication: Lubrication is essential for aluminum gears to minimize friction, wear, and heat generation. Design considerations should include providing adequate space for lubricant reservoirs, channels, or oil passages to ensure proper lubricant distribution across the gear surfaces. The gear design should also facilitate efficient lubricant retention and minimize the risk of lubricant leakage or contamination.
6. Noise and Vibration: Aluminum gears can contribute to noise reduction due to their damping properties. However, the gear design should aim to further minimize noise and vibration levels. Considerations include gear tooth profile optimization, gear tooth surface finish, backlash control, and the use of noise-dampening features such as gear coatings or sound-absorbing materials.
7. Manufacturability: Designing aluminum gears should take into account the manufacturability aspects. Aluminum is a highly formable material, allowing for complex gear shapes and intricate designs. However, considerations such as casting or machining processes, tooling requirements, dimensional tolerances, and surface finish specifications should be addressed to ensure consistent and cost-effective production.
8. Compatibility with Other Components: Aluminum gears are often used in conjunction with other components within a larger system. It’s important to ensure compatibility between aluminum gears and other materials or components they interact with. Factors such as galvanic corrosion, differential thermal expansion, or material compatibility should be considered to prevent premature failure or performance issues.
By addressing these specific design considerations, aluminum gears can be effectively utilized in various applications, taking advantage of their unique properties and benefits.
What industries commonly use aluminum gears?
Aluminum gears find applications in various industries. Here’s a detailed explanation:
1. Automotive Industry: The automotive industry extensively uses aluminum gears, particularly in transmissions and differentials. The lightweight nature of aluminum gears helps improve fuel efficiency and overall vehicle performance. Additionally, aluminum gears are used in engine timing systems, power steering mechanisms, and other automotive components.
2. Aerospace Industry: Aluminum gears are utilized in the aerospace industry for applications such as aircraft engines, landing gear systems, and actuation mechanisms. The weight reduction benefits of aluminum gears are particularly valuable in aerospace, where minimizing weight is crucial for fuel efficiency and payload capacity.
3. Railway Industry: Aluminum gears are employed in various railway applications, including propulsion systems, gearboxes, and braking systems. The lightweight nature of aluminum gears helps reduce energy consumption and enhances the overall efficiency of railway systems. Additionally, aluminum gears offer corrosion resistance, which is advantageous in railway environments.
4. Marine Industry: Aluminum gears are used in marine applications, such as boat propulsion systems, marine engines, and winches. The corrosion resistance of aluminum gears is especially important in marine environments where exposure to saltwater and moisture is common.
5. Machinery and Equipment Manufacturing: Aluminum gears are utilized in a wide range of machinery and equipment, including industrial machinery, agricultural equipment, construction machinery, and material handling systems. The lightweight nature, corrosion resistance, and design flexibility of aluminum gears make them suitable for various machinery applications.
6. Electronics and Robotics: Aluminum gears are employed in electronics and robotics applications where weight reduction, compact size, and electrical conductivity are essential. They are used in precision equipment, robotic arms, automation systems, and various electromechanical devices.
7. Medical Equipment: The medical equipment industry utilizes aluminum gears in devices such as imaging equipment, robotic surgical systems, and diagnostic instruments. Aluminum gears offer advantages such as lightweight construction, noise reduction, and electrical conductivity in medical applications.
8. Sports and Recreation: Aluminum gears are used in sports and recreational equipment, including bicycles, motorcycles, scooters, and fitness machines. The lightweight nature of aluminum gears contributes to improved performance, maneuverability, and user experience in these applications.
9. Power Generation: Aluminum gears find applications in power generation systems, such as wind turbines and hydroelectric generators. The lightweight construction of aluminum gears facilitates efficient energy conversion and reduces the loads on the power transmission components.
These are just a few examples of the industries that commonly use aluminum gears. The versatility, lightweight nature, corrosion resistance, and other advantageous properties of aluminum gears make them suitable for a wide range of applications across numerous industries.
editor by CX 2023-10-11