China supplier CZPT Series Worm Gear Screw Jack Electric Screw Jack Bevel Gear Screw Jack worm and wheel gear

Product Description

1.Convenient to adjust
2.Wide range of ratio
3.Easy to install
4.high torque
Application Industries:
Our SWL series screw jacks are widely used in the industries such as metallurgy,mining,hoisting and transportation, electrical
power,energy source,constrction and building material,light industry and traffice industry

Screw Jacks in construction

Often found in climbing mechanism of construction,the screw jacks use physical means to raise and lower loads, which typically range from 5 tons to 30 tons. A screw jack is a common type of mechanical jack, which works via a motor and gearbox by an operator. A screw uses the shape of its threads to raise or lower the load, or a traveling nut does the lifting while the screw turns in place. Mechanical jacks are self-locking(not for ball screw), which means that when power is removed from the jack, the screw stays in place until power resumes. This setup makes mechanical jacks safer than their hydraulic counterparts, because users don’t have to fear a loss of power. The main components of screw jacks are; trapezoidal lifting screw also known as lead screw, worm screw, worm gear and gear housing. A worm screw is rotated manually or by a motor. With the rotation of the worm gear, the lead screw in it moves upwards or downwards linearly. The feed rate of the screw depends on the turning speed, the number of teeth of the gears and the size of the screw pitch. In some models of jackscrews, The lifting screw does not move up and down. It only rotates around its axis. A lifting nut (also known as a travelling nut) moves along the lead screw. The lifting nut of the screw jack is made of bronze to decrease friction.

Product Parameters

MODEL

 

SWL2.5

SWL5

SWL10

SWL15

SWL20

SWL25

SWL35

Maximum lifting force (kN)

 

25

50

100

150

200

250

350

Screw thread size

 

Tr30*6

Tr40*7

Tr58*12

Tr58*12

Tr65*12

Tr90*16

Tr100*20

Maximum tension (kN)

 

25

50

99

166

250

350

Worm gear ratio (mm)

P

1/6

1/8

3/23

1/8

3/32

3/32

 

M

1/24

1/24

1/24

1/24

1/32

1/32

Worm non rotating stroke (mm)

P

1.0

0.875

1.565

1.56

1.5

1.875

M

0.250

0.292

0.5

0.5

0.5

0.625

Maximum elongation of screw rod under tensile load (mm)

 

1500

2000

2500

3000

3500

4000

Maximum lifting height at maximum pressure load (mm)

The head of the screw rod is not guided

250

385

500

400

490

850

820

Lead screw head guide

400

770

1000

800

980

1700

1640

Worm torque at full load(N.m)

P

18

39.5

119

179

240

366

464

M

8.86

19.8

60

90

122

217

253

efficiency(%)

P

22

23

20.5

 

19.5

16

18

M

11

11.5

13

 

12.8

9

11

Weight without stroke(kg)

 

7.3

16.2

25

 

36

70.5

87

Weight of screw rod per 100mm(kg)

 

0.45

0.82

1.67

 

2.15

4.15

5.20

Detailed Photos

 

 

 

SWL Series worm screw Jack:

1.The elevator is a combination of turbine pair and trapezoid screw rod to complete the lifting and lowering of objects. 2.Compact structure, light weight, safety and reliability, long service life, convenient installation

3.Self-locking function in the static state.

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Related Products

 

Packaging & Shipping

 

Company Profile

 

screw gear

How do you prevent backlash and gear play in a screw gear mechanism?

Preventing backlash and gear play in a screw gear mechanism is crucial to ensure accurate and efficient operation. Backlash refers to the clearance or play between the mating teeth of the worm gear and the worm wheel. Excessive backlash can lead to reduced accuracy, vibrations, and inefficient power transmission. Here’s a detailed explanation of how to prevent backlash and gear play in a screw gear mechanism:

  • Precision Manufacturing: Proper manufacturing techniques are essential to minimize backlash in a screw gear mechanism. Precise machining processes and tight manufacturing tolerances help ensure accurate gear tooth profiles, proper gear meshing, and minimal clearance between the mating teeth. CNC (Computer Numerical Control) machining and gear hobbing are commonly used to achieve high precision in screw gear manufacturing.
  • Proper Gear Design: The design of the screw gear mechanism should take into account factors that affect backlash, such as tooth profile, tooth engagement, and gear meshing. The tooth profile should be carefully designed to optimize the contact pattern and minimize clearance. Additionally, the selection of appropriate gear dimensions, such as the number of threads and tooth lead angle, can help reduce the potential for backlash.
  • Preload: Applying a preload to the screw gear mechanism can help minimize backlash and gear play. Preload involves applying a slight axial force to the worm gear, which reduces the clearance between the teeth of the worm gear and the worm wheel. This preload eliminates the play and ensures a tight meshing between the gears. Proper preload is essential to prevent excessive friction and to ensure smooth operation without causing excessive wear or power losses.
  • Backlash Compensation: In some applications, where precise positioning is critical, backlash compensation mechanisms can be employed. These mechanisms use additional components, such as springs or adjustable shims, to compensate for any inherent backlash in the screw gear mechanism. The compensation mechanism helps maintain accurate positioning by counteracting the effects of clearance and play.
  • Quality Lubrication: Adequate lubrication is essential for minimizing friction and reducing the potential for backlash. The lubricant forms a film between the mating teeth, reducing direct metal-to-metal contact and cushioning any clearance. Proper lubrication selection, including the choice of lubricant type and viscosity, is crucial to ensure optimal performance and to minimize wear and tear.
  • Maintenance and Inspection: Regular maintenance and inspection are essential to prevent and identify backlash in a screw gear mechanism. Routine checks should be performed to ensure proper lubrication, detect any signs of wear or damage, and verify the gear meshing. If backlash is detected, it should be addressed promptly by adjusting the preload or implementing necessary corrective measures.

By employing these preventive measures, engineers and technicians can minimize backlash and gear play in a screw gear mechanism, ensuring accurate and efficient operation in various applications.

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission
Product Name: Swl Series Worm Gear Lift
Input Speed: 0-1440rpm
Ratio: 6-36
Applicable Industries: Hotels, Manufacturing Plant, Food & Beverage Facto
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

What is a screw gear and how does it work?

A screw gear, also known as a worm gear, is a type of gear mechanism that consists of a screw-like gear (called the worm) and a toothed wheel (called the worm wheel or worm gear). The screw gear operates on the principle of a helical screw driving a toothed wheel to transmit rotational motion and power. Here is a detailed explanation of how a screw gear works:

  1. Configuration: The screw gear consists of two main components: the worm and the worm wheel. The worm is a cylindrical gear with a helical thread wrapped around it, resembling a screw. The worm wheel is a toothed wheel that meshes with the worm. The orientation of the helical thread on the worm and the teeth on the worm wheel is typically perpendicular to each other.
  2. Meshing: The worm and the worm wheel mesh together by engaging the helical thread of the worm with the teeth of the worm wheel. The helical thread on the worm acts as a screw, and as the worm rotates, it drives the rotation of the worm wheel. The teeth on the worm wheel provide the necessary contact points for the meshing action.
  3. Transmitting Motion: When the worm rotates, the helical thread transfers rotational motion to the worm wheel. The helical thread of the worm pushes against the teeth of the worm wheel, causing the worm wheel to rotate. The direction of rotation of the worm wheel depends on the helix angle and the direction of rotation of the worm. The gear ratio between the worm and the worm wheel is determined by the number of teeth on the worm wheel and the pitch of the helical thread on the worm.
  4. Mechanical Advantage: One of the key characteristics of a screw gear is its ability to provide a high mechanical advantage or gear ratio. The helical design of the worm and the worm wheel allows for a large number of teeth to be engaged at any given time, resulting in a high gear ratio. This makes screw gears suitable for applications that require a significant reduction in rotational speed or an increase in torque.
  5. Self-Locking: A unique property of screw gears is their self-locking capability. Due to the helical thread design, the friction between the worm and the worm wheel tends to hold the gear system in place when the worm is not rotating. This self-locking characteristic prevents the worm wheel from backdriving the worm. It provides inherent braking or locking action, making screw gears suitable for applications where holding position or preventing reverse rotation is necessary.
  6. Efficiency and Lubrication: Screw gears generally have lower efficiency compared to other types of gears due to the sliding action between the helical thread and the teeth of the worm wheel. The sliding motion results in higher friction and heat generation. Proper lubrication is essential to minimize wear and improve efficiency. Lubricants with good adhesion and boundary lubrication properties are commonly used for screw gears.

Screw gears are widely used in various applicationscrew gear

How do you calculate the efficiency of a screw gear?

Calculating the efficiency of a screw gear, also known as a worm gear, involves determining the ratio of input power to output power and considering various factors that affect the overall efficiency of the gear system. Here’s a detailed explanation of how to calculate the efficiency of a screw gear:

  1. Measure Input Power: The first step is to measure or determine the input power to the screw gear system. This can be done by measuring the torque applied to the input shaft and the rotational speed of the input shaft. The input power can then be calculated using the formula: Input Power (Pin) = Torque (Tin) × Angular Speed (ωin).
  2. Measure Output Power: Next, measure or determine the output power of the screw gear system. This can be done by measuring the torque exerted by the output shaft and the rotational speed of the output shaft. The output power can be calculated using the formula: Output Power (Pout) = Torque (Tout) × Angular Speed (ωout).
  3. Calculate Mechanical Efficiency: The mechanical efficiency of the screw gear system is calculated by dividing the output power by the input power and multiplying the result by 100 to express it as a percentage. The formula for mechanical efficiency is: Mechanical Efficiency = (Pout/Pin) × 100%.
  4. Consider Efficiency Factors: It’s important to note that the mechanical efficiency calculated in the previous step represents the ideal efficiency of the screw gear system, assuming perfect conditions. However, several factors can affect the actual efficiency of the system. These factors include friction losses, lubrication efficiency, manufacturing tolerances, and wear. To obtain a more accurate assessment of the overall efficiency, these factors should be considered and accounted for in the calculations.
  5. Account for Friction Losses: Friction losses occur in screw gear systems due to the sliding contact between the worm gear and the worm wheel. To account for friction losses, a correction factor can be applied to the calculated mechanical efficiency. This correction factor is typically determined based on empirical data or manufacturer specifications and is subtracted from the mechanical efficiency to obtain the corrected efficiency.
  6. Consider Lubrication Efficiency: Proper lubrication is essential for reducing friction and improving the efficiency of screw gear systems. In practice, the lubrication efficiency can vary depending on factors such as the type of lubricant used, the lubrication method, and the operating conditions. To account for lubrication efficiency, a lubrication factor can be applied to the corrected efficiency calculated in the previous step. This factor is typically determined based on experience or manufacturer recommendations.
  7. Include Other Efficiency Factors: Depending on the specific application and the characteristics of the screw gear system, additional efficiency factors may need to be considered. These factors can include manufacturing tolerances, gear wear, misalignment, and other losses that can affect the overall efficiency. It’s important to assess these factors and apply appropriate correction factors or adjustments to the efficiency calculation.

By following these steps and considering the various factors that affect the efficiency of a screw gear system, it is possible to calculate a more accurate estimate of the gear’s efficiency. Keep in mind that the calculated efficiency is an approximation, and actual efficiency can vary based on operating conditions, maintenance practices, and other factors specific to the gear system and application.

s, including machinery, automotive systems, conveyor systems, lifting equipment, and many others. Their unique characteristics of high gear ratio, self-locking capability, and compact design make them suitable for specific applications where precise motion control, torque multiplication, or holding position is required.

China supplier CZPT Series Worm Gear Screw Jack Electric Screw Jack Bevel Gear Screw Jack worm and wheel gearChina supplier CZPT Series Worm Gear Screw Jack Electric Screw Jack Bevel Gear Screw Jack worm and wheel gear
editor by CX 2023-09-01