China wholesaler CZPTTruck Transmission Small Differential Gear for Main Shaft Wg2210040002 worm gear winch

Product Description

Main Gearbox Parts:Transmission Front Housing & Control System, Transimission Housing -Middle, Lay Shaft, Main Shaft, Idle Wheel, Sub Gearbox 1, Sub Gearbox 2, Import Shaft and Cover, Small Cover, Fork Shaft(HW19710), (HW19710)/Pump and Pipe(HW19710), Air Pipeand.

 

PART(S) NUMBER

Part Name

AZ

Main Shaft Ass.

AZ

Lay Shaft-left

AZ

Lay Shaft-right

AZ

Small Cover Ass.

WG

Synchronizer Ring

WG

Double H Valve

WG220325571

Pneumatic Control Valve

WG

Pressure Switch

Q2881016F9

Set Screw

WG

Clutch Release Fork

AZ

Transmission Front Housing

AZ225711005

Transmission Middle Housing

AZ

Lay Shaft Forth Gear

WG

Idler Shaft

AZ225710040

Range Gear Subbox Ass.

WG

Planetary Rack

AZ

Output Shaft

WG

Fork Pendulum Block

WG

Range Block Cylinder

WG225710009

Odometer Connector Ass.

AZ

Transmission Back Housing

WG

Synchronous Push Block

WG

Planetary Wheel

WG

Input Shaft End Cap

WG

Support Rod Ass.

WG

Sensor Drive Ring

AZ

Shift Head

WG

Gear Selection Support Shaft

WG

Oil Pump Ass.

Female Screw

 

 

Sincere to customer and in good faith of quality is our forever followed motto. It’s the basement to be a human and on business. We take all responsibility for our products and service sincerely.

 

 

 

 

Company brief introduction:
We are established in 2571. The company is located in HangZhou City, ZheJiang Province, where CHINAMFG is located.Sincere to the customer and in good faith of quality is Deruna Heavy Truck Parts forever followed motto. It’s the basement to be a human and do business. We take all responsibility for our products and service sincerely.

Main product:

Our company specializing in the manufacturing and wholesale of China National Heavy Duty Truck, ZheJiang Heavy Duty Truck, Beiben truck, CHINAMFG truck and its related accessories. We mainly engage in various accessories products such as truck parts, cylinder blocks, crankshafts, diesel engines.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.

Overseas market at present:

Our sales have averaged over 10 years of experience in exporting, and are proficient in all processes of business operation which can efficiently fulfill customer needs.

We currently export to 37 countries, and the client partners from Russia, New Zealand, Fiji, Papua New Guinea, Malaysia, Zambia, South Sudan, United Arab Emirates, Zimbabwe, Colombia and so on. We can also help you to supply registration documents of the importing in different countries. Welcome new and regular customers to contact us to establish future business relationships and achieve common success!

Q: What if I can not provide part number for reference?A: If no part number, we can judge and quote the requested parts by engine name-plate or photos; It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.

Q: Can we buy 1 pcs of truck parts for quality testing?A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.

Q: Do you test all your goods before delivery?A: Yes, we have 100% test before delivery.

Q: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q: How long is the production time of the goods?A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.

Q: What is the packing?A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Car, Truck
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Optional
Step: Optional
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

differential gear

Can you provide examples of vehicles that use differential gears?

Differential gears are utilized in various types of vehicles to enable smooth and efficient power distribution to the wheels. Here are some examples of vehicles that use differential gears:

1. Passenger Cars:

Most passenger cars, including sedans, hatchbacks, and SUVs, are equipped with differential gears. These gears are typically found in the rear axle of rear-wheel-drive vehicles or in both the front and rear axles of all-wheel-drive vehicles. Differential gears allow the wheels to rotate at different speeds while maintaining power transfer, ensuring smooth cornering and traction on different road surfaces.

2. Trucks and Pickup Trucks:

Trucks and pickup trucks commonly employ differential gears to enhance their performance, especially for towing, hauling, and off-road applications. Rear-wheel-drive trucks utilize differential gears in the rear axle, while many modern trucks also feature all-wheel-drive or four-wheel-drive systems with differential gears in both the front and rear axles. These differential gears enable improved traction, power distribution, and maneuverability in various driving conditions.

3. SUVs and Crossovers:

Sport utility vehicles (SUVs) and crossovers often incorporate differential gears to provide enhanced off-road capability and all-weather performance. Many SUVs are equipped with all-wheel-drive or four-wheel-drive systems that utilize differential gears in the front and rear axles. These gears allow power transfer between the wheels and enable optimal traction on different terrains, making SUVs well-suited for off-road adventures and challenging driving conditions.

4. Sports Cars and Performance Vehicles:

Sports cars and high-performance vehicles often employ advanced differential systems for improved handling, stability, and performance. Examples include limited-slip differentials, electronic differentials, or torque vectoring differentials. These systems use differential gears in combination with advanced technologies to distribute torque to the wheels based on driving conditions, enhancing traction, cornering ability, and overall vehicle dynamics.

5. Off-Road Vehicles and SUVs:

Differential gears are essential components in off-road vehicles designed for rugged terrains and extreme driving conditions. Vehicles such as dedicated off-road SUVs, trucks, and specialized off-road vehicles like Jeeps and Land Rovers utilize differential gears, including locking differentials, to maximize traction and improve off-road performance. These gears allow for better wheel articulation, independent wheel movement, and power distribution to overcome obstacles and maintain traction on challenging off-road trails.

6. Commercial and Heavy-Duty Vehicles:

Commercial trucks, buses, and heavy-duty vehicles utilize differential gears to handle the demands of heavy loads and challenging driving conditions. Differential gears in these vehicles help distribute torque to the drive wheels efficiently, ensuring better traction, stability, and power transfer. They are critical for the performance and safety of large commercial vehicles that operate under varying load and road conditions.

7. Racing Cars:

In racing, differential gears play a vital role in enhancing performance and handling characteristics. High-performance racing cars, including Formula 1 cars, rally cars, and sports prototypes, utilize advanced differential systems that allow precise control of power distribution to optimize acceleration, cornering, and stability during high-speed maneuvers.

In summary, differential gears are utilized in a wide range of vehicles, including passenger cars, trucks, SUVs, sports cars, off-road vehicles, commercial vehicles, and racing cars. These gears are integral to achieving optimal power distribution, traction, and maneuverability in various driving conditions and applications.

differential gear

Can differential gears be used in racing and high-performance vehicles?

Yes, differential gears are extensively used in racing and high-performance vehicles. Here’s a detailed explanation of their role and importance in racing and high-performance applications:

  • Traction Optimization: Differential gears play a crucial role in optimizing traction, which is vital for racing and high-performance vehicles. They distribute torque between the wheels, allowing power to be transferred to the wheels with the most grip. This helps maximize traction during acceleration, cornering, and exiting corners, enhancing overall performance and vehicle control.
  • Cornering Stability: Differential gears contribute to cornering stability in racing and high-performance vehicles. They enable the wheels to rotate at different speeds during turns, allowing the vehicle to negotiate corners more effectively. By allowing the outer wheel to rotate faster than the inner wheel, differential gears help reduce understeer or oversteer tendencies, promoting balanced and predictable handling characteristics.
  • Adjustable Performance: Differential gears offer the advantage of adjustability, allowing fine-tuning of performance characteristics to suit specific racing disciplines or driving preferences. By selecting different types of differential gears, such as limited-slip differentials or electronically controlled differentials, drivers and engineers can optimize torque distribution, responsiveness, and traction management for different tracks, weather conditions, or driving styles.
  • Improved Acceleration: Differential gears can enhance acceleration in racing and high-performance vehicles. By choosing appropriate gear ratios, drivers can optimize torque delivery to the wheels, maximizing acceleration capabilities. Shorter gear ratios provide more low-end torque, promoting quicker acceleration off the line, while taller gear ratios optimize top speed and high-end performance.
  • Enhanced Durability: Racing and high-performance differential gears are often designed and built to withstand the demanding conditions of intense competition. They are constructed using high-quality materials, advanced manufacturing techniques, and specialized coatings to ensure durability and reliability under extreme loads, heat, and stress. This helps maintain consistent performance and minimizes the risk of mechanical failures during races or high-performance driving.

In summary, differential gears are essential components in racing and high-performance vehicles. They optimize traction, contribute to cornering stability, offer adjustability, improve acceleration, and provide enhanced durability. Differential gears are carefully selected and fine-tuned to meet the specific requirements of racing disciplines, high-performance driving, and individual preferences, ultimately enhancing overall performance, control, and competitiveness in these applications.

differential gear

What is a locking differential, and when is it used?

A locking differential is a specialized type of differential gear that provides maximum traction in challenging driving conditions. Here’s a detailed explanation:

Definition:

A locking differential, also known as a locker, is a mechanism that locks the rotation of the two wheels on an axle together, ensuring they both receive equal torque simultaneously. Unlike open differentials or limited-slip differentials, which allow the wheels to rotate at different speeds, a locking differential forces both wheels to turn together, regardless of traction conditions.

Function:

The primary function of a locking differential is to maximize traction. By mechanically linking the two wheels on an axle, a locking differential ensures that both wheels receive an equal amount of torque, regardless of the traction available to each wheel. This feature is particularly useful in off-road or extreme driving conditions where maintaining traction on all wheels is crucial.

Usage:

A locking differential is typically used in situations where improved traction is essential. Here are some scenarios where a locking differential is commonly employed:

1. Off-Road Driving:

Off-road enthusiasts often encounter challenging terrains with uneven surfaces, deep mud, rocks, or slippery conditions. In these situations, a locking differential can provide maximum traction by ensuring that both wheels on an axle rotate together. This helps prevent wheel spin and increases the likelihood of successfully navigating through difficult obstacles.

2. Rock Crawling:

Rock crawling involves traversing over large rocks and boulders, where maintaining traction is crucial. A locking differential allows both wheels to maintain contact with the ground simultaneously, providing better grip and stability. This enables the vehicle to crawl over rocks with minimal wheel spin and improved control.

3. Towing and Hauling:

When towing or hauling heavy loads, a locking differential can enhance traction and stability. The additional torque applied to both wheels helps prevent wheel slip and provides better power transfer to the ground. This is particularly useful in situations where the load may affect weight distribution and traction on the drive wheels.

4. Extreme Weather Conditions:

In certain weather conditions such as deep snow, ice, or mud, a locking differential can offer improved traction. By ensuring that both wheels on an axle rotate together, a locking differential helps mitigate wheel slip and enhances the vehicle’s ability to maintain forward momentum even in low-traction environments.

5. Off-Road Racing:

In off-road racing, where high-performance vehicles face demanding terrains and aggressive maneuvers, locking differentials are often utilized. The maximum traction provided by a locking differential allows for better acceleration, cornering, and overall performance in challenging racing conditions.

It’s important to note that while a locking differential offers superior traction, it can also negatively impact handling and maneuverability on paved surfaces. Due to the locked wheel rotation, turning becomes more difficult, and tire scrubbing may occur. Therefore, locking differentials are predominantly used in specialized applications or off-road vehicles designed for demanding environments.

In summary, a locking differential is a mechanism that locks the rotation of both wheels on an axle together, maximizing traction in challenging driving conditions. It is commonly used in off-road driving, rock crawling, towing and hauling, extreme weather conditions, and off-road racing, where maintaining traction is crucial for performance and stability.

China wholesaler CZPTTruck Transmission Small Differential Gear for Main Shaft Wg2210040002 worm gear winchChina wholesaler CZPTTruck Transmission Small Differential Gear for Main Shaft Wg2210040002 worm gear winch
editor by CX 2024-03-30