AIRPURE FILTER FACTORY SUPPLY:
Air compressor 3 filter series: air filter, oil filter, oil and gas separator
Hydraulic filter element
Air compressor precision filter element
Vacuum pump filter element
Plate and frame filter
Various custom filtersair
Compressor spare parts fan motor, hose, O-ring, oil level gauge, shaft, gear, display, diaphragm, coupling, bearing, muffler, etc
|1 0571 7165
|29571 0571 0
|1 0571 7178
|1 0571 7112
1.More than 10years filter produce experience before order we can supply sample for customers confirm quality.
2. Quality Control:Every filter will be tested before dispatched.
3.Payment Items :we supply payment by Alibaba assurance order if any problem after you receive the goods,you can ask Alibaba hold our account to protect your payment.
Q1. Is the filter custom made or is OEM available?
A: Yes, of course, just offer your required sepcifications and drawings.
Q2. Can you produce products according to a given sample?
A: Yes, we can produce according to your samples or technical drawings. We can build molds and fixtures.
Q3.What’s the payment terms?
A: T/T (bank transfer) 30% as deposit, and 70% before delivery. We will show you a photo of the packaged goods before you pay the balancing cost.
Q4. What are your terms of delivery?
A: (1) FOB (2) CFR (3) Delivery terms: CIF.
Q5. How is your delivery time?
A: Generally, according to the MOQ qty, it takes 5-7 working days after receiving your advance payment. The specific delivery time depends on the model and quantity of your order.
Q6. What is your sample policy?
A: We can supply samples if we have stock, but customers need to pay for the samples cost and the courier cost first, and we will refund the samples cost on your next order.
|Imported Raw Materials
|7 Working Days After Payment
What are the benefits of using a screw gear mechanism?
A screw gear mechanism, also known as a worm gear mechanism, offers several benefits that make it suitable for various applications. Here are some of the key advantages of using a screw gear mechanism:
- High Gear Reduction Ratio: Screw gears provide a high gear reduction ratio, which allows for significant torque multiplication. This means that a small input torque can produce a much larger output torque, making screw gears ideal for applications that require high torque output and low-speed rotation.
- Precise Positioning: Screw gears offer precise positioning capabilities due to their fine-pitch threads and high gear reduction ratio. This makes them well-suited for applications that require accurate and controlled motion control, such as robotics, automation, and positioning systems.
- Self-Locking: One of the notable advantages of screw gears is their self-locking property. The friction between the worm and the worm wheel prevents the backdriving of the system when at rest, eliminating the need for additional braking mechanisms or external locks. This self-locking feature is particularly useful in applications where holding a position is crucial, such as elevators, lifts, and safety mechanisms.
- Compact Design: Screw gear mechanisms have a compact design, making them suitable for applications with limited space. The worm and worm wheel configuration allows for a compact layout, enabling efficient power transmission in tight spaces where other types of gear mechanisms may not be feasible.
- Quiet Operation: Screw gears typically operate more quietly compared to other gear types. The meshing of the helical threads results in smooth and gradual contact, reducing noise and vibration. This makes screw gear mechanisms desirable in applications where low noise levels are essential, such as in audio equipment, precision instruments, and residential environments.
- High Shock Load Resistance: Screw gears are known for their ability to withstand shock loads. The helical nature of the threads and the larger contact area between the worm and the worm wheel distribute the load more evenly, reducing the risk of sudden failures or damage due to shock or impact loads.
- Reliable and Durable: Screw gears are known for their reliability and durability. The simplicity of their design, with fewer moving parts, results in fewer points of failure. Additionally, the self-locking feature reduces the chances of unwanted movement or slippage. When properly lubricated and maintained, screw gear mechanisms can have a long service life and require minimal maintenance.
- Versatility: Screw gears can be manufactured in various sizes, materials, and configurations to suit different applications. They can be designed as right-hand
What lubrication is required for screw gears?
Proper lubrication is essential for the efficient and reliable operation of screw gears, also known as worm gears. The lubrication requirements for screw gears depend on various factors, including the application, operating conditions, and the materials used in the gear system. Here’s a detailed explanation of the lubrication considerations for screw gears:
Selection of Lubricant:
When selecting a lubricant for screw gears, it is important to consider the following factors:
- Type of Lubricant: There are different types of lubricants available, such as oils, greases, and solid lubricants. The selection depends on factors such as operating speed, temperature range, load capacity, and environmental conditions. Consult the gear manufacturer’s recommendations or industry standards to determine the suitable lubricant type for the specific application.
- Viscosity: The lubricant viscosity should be chosen based on the operating conditions of the screw gear system. Higher viscosity lubricants are typically used for heavier loads or higher temperatures, while lower viscosity lubricants are suitable for lighter loads or lower temperatures. The viscosity should be within the range recommended by the gear manufacturer.
- Additives: Some lubricants contain additives that provide additional benefits, such as improved anti-wear properties, corrosion resistance, or extreme pressure protection. Consider the specific requirements of the screw gear system and choose a lubricant with suitable additives, if necessary.
Here are some general guidelines for lubricating screw gears:
- Initial Lubrication: Apply an appropriate amount of lubricant during the initial installation of the screw gear system. Ensure that all gear surfaces, including the worm and the worm wheel, are adequately coated with lubricant.
- Replenishment: Regularly monitor the lubricant level and condition of the screw gear system. Over time, lubricant may degrade, become contaminated, or lose its effectiveness. Follow the manufacturer’s recommendations for lubricant replenishment intervals and quantities. In some cases, lubricant replenishment may be necessary during routine maintenance.
- Proper Lubricant Distribution: Ensure that the lubricant is evenly distributed across the contacting surfaces of the screw gears. The lubricant should adequately cover the threads of the worm and the teeth of the worm wheel to reduce friction and wear. Proper lubricant distribution can be achieved through rotational movement of the gears or by applying the lubricant directly to the contact area.
- Prevent Excessive Lubrication: While proper lubrication is essential, excessive lubrication can lead to problems such as overheating, increased drag, and leakage. Follow the manufacturer’s recommendations regarding the appropriate lubricant quantity. Avoid over-greasing or over-oiling the screw gear system.
- Cleanliness: Maintain cleanliness when lubricating screw gears. Ensure that the lubrication equipment, such as grease guns or oilers, is clean and free from contaminants. Contaminants, such as dirt or debris, can compromise the lubricant’s performance and increase wear on the gears.
It is important to note that the lubrication requirements may vary based on the specific screw gear system and its operating conditions. Therefore, always refer to the gear manufacturer’s recommendations and guidelines for the most accurate and up-to-date information regarding lubrication requirements.
ed or left-handed, with different thread pitches and tooth profiles. This versatility allows for customization and adaptability to meet specific application requirements.
These benefits make screw gear mechanisms a popular choice in industries such as manufacturing, automotive, robotics, elevators, and various other applications where high torque, precise positioning, compactness, and reliability are crucial.
editor by CX 2023-09-01